SMD LED Modules |
 |
|
The SMD LED Module have 3 x Triple Chip LEDs sealed (IP65) into a plastic case making them suitable for use outdoors, or in wet environments. They are very energy efficient and don't get hot. 20 Modules use just 14.4 watts.
The Modules give a wide 140 degree dispersion of light.
They are designed to connect direclty to a 12vdc power supply or battery. The Modules are supplied from the factory in a Daisy Chain of 20, the connecting wire between each module is 3 inches (80mm), the wire can be extended to the length required for your installation. The Modules are very versatile and can be cut down to the amount required. We can supply them as single or multiple modules (pre-connected). Ideal for: Sign Lighting, Work Vans, Under Counters, Under Cabinet Lighting, Ornament Cabinets, Bars, Stairs & Steps, R/C Models, etc.. The LED Modules have mounting lugs pre-moulded into the casing making installation straight forward. Double-sided adhesive pads can also be used on the backs of the modules. Available in 6 Colours - Blue, White (6500k), Warm White (~3500k), Red, Green, and Yellow. If you want other colours you could consider Superflux LED Modules or RGB Modules SMD LED Module £3.35 each, 5 for £14.75, or 10 for £25.00. Further discounts for higher quantities. Plug-In 12vdc Power Supply (2A) for powering the Modules from Mains voltage. Capable of powering up to 30 Modules. Advice will be given when required upon order placement. £8.00 Each (Power supply only suitable for U.K Households) In-Line* 3.5A Switch Mode Power Supply (Capable of powering up to 50 Modules) - £17.00. Discount for Quantity.
In-Line* 5A Switch Mode Power Supply (Capable of powering up to 75 Modules) - £25.00. Discount for Quantity.
In-Line* 10A Switch Mode Power Supply (Capable of powering up to 150 Modules) - £39.00. Discount for Quantity. The 10A PSUs are supplied at cost price and are not for sale separately.
*In-Line Power Supplies have a removable Mains plug for permanent installations i.e through a (fused) light switch. |
 |
||
 |
||
| Above, a Mirror fitted with SMD LED Modules | ||
| Below: Schematic | ||
 |
||
Please click over pictures to enlarge |
||
|
Dimensions: 78mm x 15mm x 8mm Total length of 20 Modules, 3.16 meters. LED Type: SMD LED, 3 per Module Durability: IP65 (Splashproof) Power: 0.72w per Module Current Draw per Modules: 60ma (0.06A) Lifetime: 50,000 hours Light Output (Lumens) per chain of 20: Red - 220 lm (11 Lm per Module) Green - 360 lm (18 Lm per Module) Blue - 220 lm (11 Lm per Module) Yellow - 220 lm (11 Lm per Module) Pure White - 540 lm 220 lm (27 Lm per Module) Warm white - 540 lm 220 lm (27 Lm per Module) Case Material: ABS (UV Resistant) To calculate how many Modules you need to light an area measure the total length you intend to light up. Formula: Length to Light in Meters / 158 = Number of Modules required. For example: if you wanted to light a handrail measuring 2.1 Meters you would divide 2100 by 158, this would give 13.29, round down to 13. So you would need 13 SMD Modules. |
||
|
||
|
Ideal For: Backlighting Garden/Patio Lighting Kitchen Worksurface Lighting Cab Lighting Vans/Trucks Workshop/Shed Lighting
|
|
|
©
Copyright Litewave Ltd
|