The Glow Wire will arrive with molex connectors already attached. Simply plug the connectors into one of your computers internal power outlets, i.e hard drive power supply.

The Glow Wire can be fixed into place with Superglue or Hot Melt glue.*

The 12v wire to the inverter can be extended with additional 12v wire, make sure you keep the polarity the same, i.e red to red and black to black. The wire to the Glow Wire can also be extended, this is non polarized meaning it does not have a positive or negative.

If you need to cut the Glow Wire - the end should be sealed with heat shrink tube

Offcuts of Glow Wire can be reconnected.

One inverter can power several lengths of Glow Wire, simply wire in parallel.