 |
 |
|
ICELED FLOOD provides a powerful, high quality light beam ideally suited to floodlighting interior and an external model for outside areas. This compact light source can be surface-mounted to provide light wherever it's needed. The wide-angle beam (120 Degress) ensures an excellent spread of light even at close range. Compared to ICELED SPOT the beam is equally as bright but covers more than twice the area.
Ideal for: Footwells, head linings, seat lighting, bar illumination etc. The External FLOOD is in a robust waterproof housing with integral mounting lugs. This makes it suitable for external uses such as fill-in lighting anywhere underneath your limousine To give an idea of how wide the spread of light is, FLOOD projects a bright 1m diameter circle of light from a distance of just 350mm. This makes it useful in wheel wells or up behind bumpers or grilles. With careful placement many of the 'dark areas' not covered by UFO can be filled-in using this new light source. This product can be used with or without the UFO or Zen Systems |
|||
 |
|||
 |
|||
|
|
|||
|
|
CONTROL
|
||
|
|
ICELED FLOOD can be used with or without an external controller. A built-in programme allows it to perform a variety of functions simply by connecting to a 12 Volt DC supply. Full easy to follow instructions are included to help you get the best out of the product. |
||
|
SPECIFICATIONS Maximum current drain - 0.2 Amps Typical drain - 0.1 Amps LED Light Dispersion - 120 Degrees On-board current regulation guarantees that this light source operates consistently at peak intensity over a wide supply voltage of 10 - 16 Volts DC. 2,097152 Colours. 7 Bit 128 Levels. Reverse polarity and over-voltage protection are also built in. Dimensions of Flood: W 2.7" H 2.7" D 1" |
ICELED Flood - £49.50 each
|
||
|
Wheel Arch Lighting Kit
|
||
 |
A new kit consisting of four waterproof FLOODs is now available to fill the gaps in your underbody lighting around your wheels. Two of the four FLOODs are specially programmed to copy the frontmost pixel on the side-tubes while the rear pair will naturally copy the rearmost pixel. This means that the streetwise pattern will show amber all the way down the sides and all other patterns will flow neatly past the wheels. The kit costs £198 which also provides a saving on the cost of buying four separate light sources. They will still work when connected to ZEN or the 'I' terminal on UFO for other applications. | |
|
Wheel Arch Kit - £198.00
each
|
|
|
|
|
©
Copyright The Litewave Company
|
