Colour Changing Backlighting for TVs

	You may have seen the Philips Ambilight TV. It has a backlighting system that changes color depending on the colours being shown on the screen. Below: A Panasonic Plasma Backlit with our Colour Changing LED Tape. It livens up any room with or without the TV being switched on giving the appearance the TV is floating. Our Flexible RGB LED Tape is ideal for creating a similar effect for the TV you already have or for lighting a home cinema system. Please note that this system is not controlled by screen colours. The colours can be set to colour phasing, fixed colour, or sound responsive (with controller) regardless of whether the TV is switched on or off. The LED Tape tape has a depth of just 5mm. The 3M self-adhesive backing makes it easy to apply to most smooth surfaces by simply removing the backing paper. Unlike many poor quality systems on the market our RGB Tape can show the full spectrum of colours and can be fully controlled by Infra-red and sound response if you choose. All Tape lengths apart from the 6 Meter size have connectors at both ends making connecting different lengths and corners easy. The watermark is not on the actual product, it is shown here for copyright purposes only. The glassy resin coating provides protection from dusty environments, it can be easily cleaned with a damp cloth. Click on image below to see more photos. The LEDs used in the tape are RGB SMD LEDs, which have LED Emitters in the 3 primary colours Red, Green, and Blue. By mixing various levels of each colour upto 2.1 million colours and shades are possible! Safe low voltage - 12vdc. The LEDs produce a wide light dispersion (120 degrees) which gives a reflected glow similar to that of neon from nearby surfaces and objects. There are no dots or hotspots. Below: just a small selection of virtually unlimited colours. The tape can be cut / joined to make any length you need, connections and cutting points are at 3 LED (100mm / 4inch) intervals. Full instructions are included. The RGB Tape is supplied pre-fitted with 230mm (9 inches) of connecting wire and a plug on both end, this allows for different lengths to be easily connected together. Control The LED Tape is controlled via the ICELED Flexidriver, it has a standalone mode which allows a gradually colour phasing, any colour can be locked by briefly switching the power off and back on within 1-2 seconds, to unlock simply repeat. Even more control is possible including sound activation by using the ZAP+ or ZEN Controller. A ZEN will allow you to control Brightness, Hue, Saturation, and audio response levels. Click here to see how it's connected. For simplicity we would recommend the ZAP+ Controller. Advanced setups such as zones will require a ZEN Controller. The Tape can also be linked to any of our other Mood Lighting products. 500mm (19 Inch) LED Tape (15 LEDs) - £19 2 Meter (78 Inch) LED Tape (60 LEDs) - £69 4 Meter (157 inch) LED Tape (120 LEDs) - £129 6 Meter (236 inch) LED Tape (180 LEDs) - £175 ICELED Flexidriver to control colours (will power up to 25 Meters of Tape) - £35 THIS ITEM IS ALSO REQUIRED IF YOU USE A ZAP+ or ZEN CONTROLLER Additional 4 Core Cable Cable to extend the wire between lengths of RGB Tape and Flexidriver 70p per meter. Extra Control ICELED ZAP+ (wired) Controller with sound control - £38 ICELED ZEN (infra-red remote) Controller with audio line-in for sound to light effects - £78 Audio Link Cable - enables you to connect the ZEN to your Hi-Fi or MP3 player for a light show - £4. Power Supplies Plug-in 1.25A Switch Mode Power Supply (Capable of powering up to 2 Meters of tape in total) - £7.00 In-Line* 3.5A Switch Mode Power Supply (Capable of powering up to 6 Meters of tape in total) - £17.00. Discount for Quantity. In-Line* 5A Switch Mode Power Supply (Capable of powering up to 9 Meters of tape in total) - £25.00. Discount for Quantity. Use with the ZEN Controller. In-Line* 10A Switch Mode Power Supply (Capable of powering up to 18 Meters of tape in total) - £35.00. Discount for Quantity. Use with the ZEN Controller. *In-Line Power Supplies have a removable Mains plug for permanent installations i.e through a (fused) light switch.



Specifications: Dimensions: 13mm (W) x 5mm (D) x 500/2000/4000mm/6000mm (L) Connecting Wire: 4 Core Cable 230mm with plug connectors each end. LED Type: RGB SMD Voltage: 12vdc Current per Meter length: approx 150ma per colour, 450ma on white (maximum drain). Light Dispersion: 140 degrees. Luminous Flux (lm) per 500mm: 110-140 Luminous Flux (lm) per 2M: 450-500 Luminous Flux (lm) per 4M: 900-1000 Luminous Flux (lm) per 6M: 1300-1400 Dominant Wavelength (nm): Red 625, Green 525, Blue 470 LED Spacing: 33.5mm pcd Cutting Points: 100mm LED Qty: 15 Per 500mm Durability: Dustproof and Splashproof
Ideal for: Edge lighting glass or acrylic shelving Kitchen Cabinet / Plinth lighting Alcoves and Architraves Glass Blocks Home Cinema Stair Lights Anywhere you want to glow!


	CONTROL
	ICELED Flexidriver can be used with or without an external controller. A built-in programme allows it to perform a variety of functions simply by connecting to a 12 Volt DC supply. Full easy to follow instructions are included to help you get the best out of the product.
Flexidriver Specifications Nominal Supply Voltage: 12vdc Maximum Switched Current: 5 Amps (per channel) Maximum "through" current: 15 Amps Maximum Load: 180 watts @ 12vdc (25 Meters LED Tape) Data accepted: Global ICELED, DMX via ICELED Bridge, UFO Tube segment 0, pixel 0 Colours: 2,097152. 7 Bit 128 Levels. Dimensions of Flexidriver: L 65mm, W 50mm, H 25mm		One Flexidriver is capable of powering up to 25 Meters of LED Tape. The diagram below illustrates how the 4 wires from the LED Tape are connected to the Flexidriver and in turn the power supply. Click on image for a larger diagram, other diagrams also shown for the ZAP+, and ZEN Controller.