Switchmode Power Supplies

We have a range of 12v Power Supplies starting from the 2A below and going up to a 10A In-line Power Supply.

They have all the relevant safety certification with overload and short circuit protection built-in.

There is no minimum amount of LEDs you can power from any of these Power Supplies. They can power just 1 LED product up to the stated maximum amount of LED products for the PSU you choose.

All of our Power Supplies are suitable for use on worldwide voltages in any country! The Plug Top PSU will require an adaptor for use outside of the U.K.

The Datasheet gives the specifications and dimensions for each of the Power Supplies.

Plug Top 2A Switch Mode Power Supply - £8.00.

The In-line Power Supplies below look similar to Laptop Power Supplies, they include a mains lead with plug. They can be plugged straight into a standard wall socket or where necessary can be hardwired to the mains - this allows control over the LED Lighting via a wall light switch. To do this the mains plug can be removed and the lead hardwired through a fused spur, the power supply can be hidden out of sight.

NOTE: If you intend the power suppy to be hardwired, a qualified electrician should be used.

3.5A Switch Mode Power Supply with Mains lead (not shown) and U.K Plug pre-fitted

Includes mains lead with removeable plug (not shown)

In-Line* 3.5A Switch Mode Power Supply - £17.00. Discount for Quantity.

5A Switch Mode Power Supply with Mains lead (not shown) and U.K Plug pre-fitted

Includes mains lead with removeable plug (not shown)

In-Line* 5A Switch Mode Power Supply - £25.00. Discount for Quantity.

10A Switch Mode Power Supply (built-in cooling fan), with Mains lead (not shown) and U.K Plug pre-fitted

Includes mains lead with removeable plug (not shown)

In-Line* 10A Switch Mode Power Supply - £39.00. Discount for Quantity. Due to the very low price we are selling this PSU, it is only for sale with our lighting products.

12.5A Switch Mode Power Supply, with Mains lead (not shown) and U.K Plug pre-fitted

The PSU supplied may vary from this photo.

Includes mains lead with removeable plug (not shown)

In-Line* 12.5A Switch Mode Power Supply - £59.00. Discount for Quantity. Due to the very low price we are selling this PSU, it is only for sale with our lighting products.

12.5A Switch Mode (Outdoor) Power Supply, with U.K Plug pre-fitted. Triple output, Max total current 12.5A. Waterproof, ie. rain proof, they should not be submerged under water.

Includes mains lead with removeable plug

In-Line* 12.5A Switch Mode Power Supply - £49.00. Discount for Quantity.

*In-Line Power Supplies have a removable Mains plug for permanent installations i.e through a (fused) light switch.

 

Important when installing ANY Power Supplies (PSUs):

The Power Supply used for the LED products should be of sufficient current, the LEDs will only draw the current they require from the Power Supply which means you can power just one 12vdc LED from a high Ampere PSU. Power Supplies should not be overloaded i.e the total load of the LEDs should not exceeed the rating of the Power Supply.

Space should be left around the Power Supply to allow ventilation, this allows any heat from PSU to dissipate.

Power Supplies should not be hidden in a wall or ceiling space that will be covered with plasterboard or panelling, there should be sufficient ventilation and an access panel for replacement of the PSU.

Cable between the output of the Power Supplies and the input to the LEDs/LED Products should be sufficient to carry the total load on it. Where the Power Supply exceeds the total load a safety fuse should be used, the fuse shoud be rated slightly higher than the load, for example a load of 1.8A on a 3.5A PSU should have a fuse of 2A between the positive (+) 12v output of the PSU and the positve (+) input to the LEDs.