LED Screw Lights

 

12 Volts

LED Screw Lights are ideal for illuminating car number plates, decking, railings, ceilings, steps, PCs etc. It is possible to fit LED Screw Lights anywhere a bolt can be fitted, just drill a hole and fix them into place using the screw thread and nuts and washers supplied- then connect the two wires and power them up.

They can be used with any 12v dc power supply, and can also be powered from a 9v PP3 battery - the square one.

There is approximately 90cm of wire on each Screw Light.

There are 2 LED Screw Lights in a pack (with fittings)

Choice of three colours: Blue, Red, or White

 
 
 
Price pack (2) £6.95 or 2 packs for £10.90
Select Colour  
 
   

Specifications

Light Source
High Intensity LED
Lamp Life
20,000 Hours approx.
Colours
Blue, Red, and White
Typ. Lum. Intensity
1100 mcd approx
Voltage
12v
Current
30mA per LED Screw Light
Power Consumption
360mW each
Use a 12mm spanner or deep 12mm socket to tighten fully
Housing
Steel

 

 

 

© Copyright The Litewave Company