LED Ground Lighting

We have put together an extremely bright LED Ground Lighting Kit. The Kit uses Superbright Superflux LEDs, each kit consists of 240 LEDs resulting in one of the brightest and widest glows available!

Suitable for use under cars, in cars, under bikes, in the home, around the garden, even under water!

Waterproof

Low Voltage

Energy efficient the entire kit is just 1.5Amps - 18 watts.

Flexible

Low profile

Durable

Mark R's Lamborghini Countach fitted with one of our kits

The 120 degree LEDs are placed closeley together along the entire length of the bar which produces a bright colour wash with no dots or hotspots.

The LEDs are housed in Polycarbonate Bars and all of the air is squeezed out when the circuit boards are sealed with polyurethane resin. This makes them very rugged and fully waterproof - IP68 rated. The bars are flat just 8m deep by 14mm wide and will flex to follow virtually any contour.

Colours available: Blue, Green, Red, Amber, White, and Pink (even lower price)

The Kit includes the 2 x 4Ft and 2 x 2.5 Ft LED Bars, fuse, switch, fixing clips, and instruction manual.

Price per Kit - £125

Pic 'n Mix your own system:

Individual LED Bars with all fittings. Build the kit to the size and colour/s you require. The smaller tubes are also very well suited for lighting the interior of your vehicle, or even under Motorbikes and Scooters.

Colours available: Blue, Green, Red, Amber, White, and Pink (even lower price)

300mm LED Bar (18 LEDs) - £19

800mm LED Bar (48 LEDs) - £35

1200mm LED Bar (72 LEDs) - £40

If you would prefer not to drill holes in your chassis, then the LED Bars can be fixed in place by using some of the latest adhesives. You will need to clean the area well and key the surface of the chassis with emery cloth prior to applying the adhesive.

Here is a list of good quality adhesives:

'Sovereign Panel Adhesive' - used on the Lamborghini above.

'Pink Grip'

'Evo Stik - Sticks like SH**' - yes that's what it's called!

Click on pictures to enlarge

This box of tricks saves running a switch to the dashboard and makes wiring much easier.

The included instructions show how to connect all of the LED Bars to one channel or separate channels allowing you to control each Bar individually or as one.

You can also remotely control; Horns, Ignition, Neons, LEDS, Lighting etc.

15A Switching capability per channel.

Operation is via radio frequency so will be unaffected by walls or other obstacles. 12vdc

Installation; two wires to the battery, with 8 output wires - 2 for each of the 4 accessories. Fixings and Instructions are included.

Price: £24 each

A customer's comments:

After a bit of crawling about below the car - not easy it's a trifle low to the ground - this is what resulted: see attached pics as promised. The lily is now fully gilded!

BTW, I didn’t use the mounting clips provided - I was reluctant to drill holes everywhere. What works superbly is builders' adhesive (you probably know this already): the brown type in mastic tubes used for sticking skirting boards, plasterboard etc.

Thanks for a great product, and your help and advice.

Best regards

Mark R.