Mini LED Screw Lights

Mini LED Screw Lights are ideal for where a pin point of light is required either to highlight an object or for effect.

Use in places such as railings, ceilings, steps and stairs.

It is possible to use the Mini LED Screw Lights anywhere a bolt can be fitted, just drill a hole and fix them into place using the screw thread and nuts and washers supplied - then connect the two wires and power them up.

They use very little power just 0.25 watts per Mini Screw Light!

Each Mini Screw Light is fitted with a Superbright LED and an in-line resistor allowing for direct connection to 12vdc.

They can be used with any 12v dc power supply, and can also be powered from a 9v PP3 battery (the square one).

There is approximately 90cm of wire on each Screw Light.

Choice of 6 colours: Blue, Red, White, Green, Amber, Pink

Power Supplies

Plug-In 12vdc Power Supply (Plugs into mains socket).

Rated at 2A. Will power up to 80 Mini LED Screw Lights. Free connector included.

£8.00 (Power Supply Suitable for U.K Households Only)

In-Line 3.5A Switch Mode Power Supply (Capable of powering up to 150 Mini LED Screw Lights) - £17.00. Discount for Quantity.

This Power Supply can be wired through a fused spur to a wall switch

Twin Core (3A) Mains Cable (White) to extend the wire to the Mini LED Screw Lights - £0.49 pence per meter.