1.5 Meter RGB LED Tape (SILICONE) (60 LEDs per Meter)
This LED Tape is identical to our standard RGB LED Tape except it has twice as many LEDs per Meter.
It is ideal for where you want even more light!
As usual it is durable and is suitable for use in damp and wet environments.
It can be used with our Flexi (2.1 Million Colour) Driver and optional controllers.
To get the best out of the product we recommend using the Flexi Driver (shown below), this will give you automatic colour cycling which takes about 90 seconds to go through the colours,any colour can be frozen by switching the power off and back on, to unlock simply repeat.
For additional push button control over colours; to slow the colour phase down, lock colours, set scenes and music response you should use either the ZAP+ or ZEN Controllers (below).
|Total Power||18 Watts|
|Dimensions||12.5mm (W) x 4.5mm (D) x 1.5 Meters|
|Wire Length Pre-fitted||400mm (15") Extendable|
|LED Type||RGB 3 Chip SMD|
|Current draw||~350mA per colour|
1.5A on white (max. current draw)
|Light Dispersion||140 degrees|
|Luminous Flux (lm) per 500mm||~540|
|Dominant Wavelength (nm)||Red 625 Green 525 Blue 470|
|Cutting Points||50mm (2") Intervals|
|LED Qty||30 Per Meter|
For more information about one of the products below simply click the name of the product.
|ZAP (2.1M Colour) Controller||£38.00|
|Flexi Driver (2.1M Colour Driver)||£35.00|
|ZEN (2.1M Colour) Controller with Remote & Remote/Display||£78.00|
|2A Switchmode Plug-top 12vdc Power Supply. This will power up to 3 Meters of LED Tape||£8.00|
|2A Switchmode In-Line 12vdc Power Supply, Free DC Connector (5 Amp)||£14.00|