3 Watt Fibre Optic LED Projector
A very affordable way of lighting Side-Glow Fibre. This 3w Light Source provides a focused beam that works very well with Fibre Optics.
Up to 5 Side-Glow Fibres can be fitted into just one of these LED Projectors.
Fitting is easy, the holes are threaded allowing the Fibre to be simply screwed securley into place.
The Fibre can go out from the projector without looping back to the projector (this is called a return). However if you do have a return to the projector it effectively doubles the amount of Fibre you can illuminate. The return can also be to a separate projector.
This allows the Fibre to be used as perimeter lighting around a room, a vehicle, or even swimming pool.
Side Glow Fibre (linked below) can be used along skirting boards, around wall perimeters, stairs, decking, and even driveways!
Available in White (6000K), Warm White (3500K), and RGB (Colour Changeable).
For our Colour Changeable type you have a choice of 7 colour by connecting the wire for the corresponding colours you want or a combination of wires to mix the colours.
For more colours we recommend using our Flexi Driver, or Flexi Driver+ if more control is needed.
|LED||1 × 3W|
|Hole Cut Diameter||41mm|
|Dimensions||65mm x 50mm|
For more information about one of the products below simply click the name of the product.