Colour Changeable (RGB) Deck and Step Light - T Cable
The "T" cable is designed for use in installations where the wiring must be in place before the lights are installed such as bathrooms. The "T" cable is installed with 1M Extension cables (recommended), the 1M Extension cables should be looped behind where the wall and tiles will be and measurements taken. So when the holes are drilled the wire can be pulled through the Plinth Lights connected and the excess cable pushed back through into the cavity.
Each cable can connect a maximum of 6 lights, for more lights in the run you will need to add additional "T" cables.
The space between each "T" is 500mm with a total length of 3.1M.
|Suitable for||the suggested product in the "Other Options" list|