Colour Changeable (RGB) LED Step Light
Ideal for where you want to create a subtle wash of light on Steps and Plinths.
Suitable for use Indoors or Outdoors
The LED is coated with a clear resin and encased in a rugged housing which fits neatly into a 18mm hole with only the small hood showing, the hood hides the LED so that only the projected light is visible.
The LED itself is RGB with a Red, Green and Blue element, this means it can be wired to display any of these 7 colours: White, Red, Green, Blue, Yellow, Cyan, and Magenta. Simply connect the wires to the 12v positive of the power supply for the colour you want.
Or by using our Flexi (2.1 Million Colour) Driver you will get a seamless phase of colours on a gradual 90 second cycle.
Additional control is available by using the ZAP or ZEN Controllers shown below.
A T-Cable is stocked enabling quick and easy installation of multiple lights, along with 1M extension cables, shown below.
There are a choice of 3 Power Supplies, a Plug-top type for plugging directly into a mains socket or an In-Line type for Wiring to a Light Switch. The 1A PSU can run up to 14 Step Light Lights, and the 2A PSU can run up to 30 of them.
|LED Power||0.36 Watts|
|Cut out Diameter||18mm|
|Recess Depth Required to fit LED||36.5 mm|
|Material||Enamel coated Steel|
Product Code: RGBLEDDSL
|2 for||£7.65 each|
|5 for||£7.45 each|
|10 for||£6.95 each|
|20 for||£6.50 each|
For more information about one of the products below simply click the name of the product.