Constant Current LED Strip (10-15vdc)
Constant Current LED Strip is the preferred choice for professional installations.
The best quality available in the U.K if not Europe
Available in a continuous length up to 10 Meters
The way in which the current and voltage are regulated to the LEDs makes a lifetime beyond 50,000 hours possible. Standard LED Strips only have voltage regulation via 1 or 2 resistors.
3 Year Warranty
The on-board transistors regulate the current and voltage to each LED. This ensures even brightness along the entire length and protects the LEDs from excessive current and voltage which could cause them to overheat, this results in a much longer lifetime than standard LED Strip with very little deterioration in brightness over time.
As with our other LED Strips this Regulated Current Strip can be powered from our standard 12vdc Power Supplies (Transformers).
There are cutting points at every LED (33mm). Each LED is in effect it's own circuit.
Where required the Strip can be cut as short as a single LED or can be run to a maximum length of 10 Meters with a power draw of just 36 watts.
The LED Strip can be cut into the necessary lengths and wires can be soldered from one length of strip to another for installations in cabinets, shelves and the like. This is a much neater way of running the LED Strip so that only one length of cable is run to one power supply.
It can be dimmed either on the 12v input side to the Strip or by using one of our Mains Dimmable Transformers (below) which makes it possible to use a wall dimmer to control the brightness of the LED Strip. We recommend an LED Wall Dimmer such as the Varilight V-Pro (available below).
Available in White (6000k) or Warm White (3500k).
The White produces a cool white near to that of a computer display, it is ideal for use where a clean modern look is desired.
Warm White closely matches that of Halogens and is in keeping with most home lighting for living rooms and areas of relaxation.
Regulated Current and Voltage LED Strip is compatible with our Aluminium Profiles allowing you to custom make your lighting fixture to your exact requirements.
Below is a selection of the Power Supplies or Transformers for the LED Strip.
Choose the appropriate Power Supplies:
1A Power Supply - runs up to 3 Meters of LED Strip.
2A Power Supply - runs up to 6 Meters of LED Strip.
3A Power Supply - runs up to 9 Meters of LED Strip.
5A Power Supply - runs up to 15 Meters of LED Strip.
|LED Type||SMD Triple Chip|
|Current per Meter||300mA|
|Power Draw per Meter||3.6 Watts|
|Width of LED Strip||10mm|
|Depth of LED Strip||2.2mm|
|Lengths available||1 - 10M|
|Brightness Lumens /M||~450|
|Expected Lifetime||>50,000 hours|
|LEDs per Meter||30|
Product Code: C/C-LEDSTRIP
|Lengths & Prices:|
Please choose one of the options below for more details
- Waterproof Single Colour Constant Current LED Tape (12vdc) (30 LEDs/M)(SILICONE) - £24.00
- Aluminium LED Profile - For Fitting into a routed groove - £18.50
- Aluminium LED Profile - Wall Uplighting - £19.25
- Aluminium LED Profile - Recess fit into tiles and other substrates - £18.50
- Aluminium LED Profile - For surface mounting under cabinets - £19.25
- Aluminium LED Profile - Corner Mount - £19.25
For more information about one of the products below simply click the name of the product.