Flush Mount Ceiling PIR Switch
Designed to control low power lights such as LED Lighting this PIR Switch will automatically switch on the Power to the lights when it senses a person enter the room.
The lights will stay on for the time you pre-set when the person leaves the room, this can be from 10 seconds to 40 minutes.
Adjustable light sensitivity and time delay
|Input Voltage||220 - 240Vac, 50Hz|
|Hole Cut out||73/75mm|
|Mounting Depth Required||95mm|
|Delay Time||10 Seconds to 40 Mins in 9 Steps|
|Detection Range||360 Degrees with 5m Diameter at 2.4M ceiling height|
|Minimum Load||2w Resistive suitable for LED Lighting|
|Maximum Loading||1000w of Resistive Loads|
|Maximum Loading||750w of Transformer Loads|
|Lux||10 to 1000 and photocell becomes inactive|