Mini (20mm) Single Colour LED Plinth and Floor Light (Waterproof IP67, 12vdc)

Product Description

Designed for customers requiring a discrete low powered light for use in ceilings, kitchen plinths, shower plinths and bath plinths & alcoves, steps and stairs, even outdoors in patios, decking and walls.

This high quality fitting has a single SMD LED Chip housed within a 314 Stainless Steel body with a beautifully machined bezel giving the product an attractive appearance whether switched on or off.

  • Waterproof to IP67 (temporary submersion under water)
  • Stainless Steel (Will not rust)
  • Suitable for use indoors or outdoors
  • Low power consumption just 0.6 watts per Light!

Use with our Flush Mount PIR Sensor for automatic switching on and off (timer) when someone enters the room.

A low level light for accenting a room or providing a glow at night time, not designed for general illumination

The Plinth Lights are IP67 meaning they are waterproof and suitable for use in Bathrooms, Kitchens, Living Rooms, or even outdoors in Driveways or Decking.

This product is low powered and does not get hot or project any heat

Each Plinth light is pre-wired with 2 × 0.5 Meter cables each with opposite waterproof connectors allowing the lights to be daisy chained. This makes installation easy with only the first light in the chain needing to be connected to the Power Supply.

There are a choice Power Supplies (Transformers), the size of Power Supply you will need depends on how many you want to power. Below we have listed the amount of Mini Plinth Lights each of the Power Supplies can power.

The lights can be almost up to 1 Meter apart without needing to extend the cable.

We stock a range of Plug and Play extension cables for areas where you need to extend the cable between the lights (see related items below).

Product Specification

Voltage12vdc
Max. Current50ma
LED TypeSMD Warm White
LED Power0.6 Watts
Lens MaterialGlass
Flange Diameter20mm
Lens Diameter10mm
Cut out Diameter16mm
Lens ClarityClear
Body Length20mm
Recess Depth Required to fit LED25mm
No. of Wires2 in 2 out
Wire Length0.5M (19")
DurabilityIP67
Warranty2 Years
CertificationsCE, RoHS, F, III

Product Code: Mini-SPFL

£8.85
Quantity :
Quantity Prices:
2 for£8.65 each
5 for£8.40 each
10 for£8.15 each
20 for£7.95 each
50 for£7.65 each

Accessories

For more information about one of the products below simply click the name of the product.

  Colour Controller Price  
LightboxS - 12/24vdc Dimmer with On/Off
Provides dimming control via a Smartphone or Tablet.
£29.00
Quantity :
  Power Supplies Price  
2A Switchmode Plug-top 12vdc Power Supply, Free DC Connector (5 Amp)
This will power 1-26 Mini Plinth Lights - The PSU can be plugged into a mains socket only.
£8.00


1A Switchmode In-Line 12vdc Power Supply, Free (5 Amp) DC Connector
This will power 1-14 Mini Plinth Lights - The PSU can be plugged into a mains socket, or the plug can be removed and the lead connected to a fused light switch (Electrician Required).
£11.50


2A Switchmode In-Line 12vdc Power Supply, Free DC Connector (5 Amp)
This will power 1-26 Mini Plinth Lights - The PSU can be plugged into a mains socket, or the plug can be removed and the lead connected to a fused light switch (Electrician Required).
£14.00


3A Switchmode In-Line 12vdc Power Supply, Free DC Connector (5 Amp)
This will power 1-54 Mini Plinth Lights - The PSU can be plugged into a mains socket, or the plug can be removed and the lead connected to a fused light switch (Electrician Required).
£16.00


5A Switchmode In-Line 12vdc Power Supply, Free DC Connector (5 Amp)
This will power 1-78 Mini Plinth Lights - The PSU can be plugged into a mains socket, or the plug can be removed and the lead connected to a fused light switch (Electrician Required).
£21.00


7.5A Switchmode In-Line 12vdc Power Supply
This will power 1-118 Mini Plinth Lights - The PSU can be plugged into a mains socket, or the plug can be removed and the lead connected to a fused light switch (Electrician Required).
£32.00


10A Switch Mode In-Line 12vdc Power Supply (Fanless)
This will power 1-163 Mini Plinth Lights - The PSU can be plugged into a mains socket, or the plug can be removed and the lead connected to a fused light switch (Electrician Required).
£39.00


12.5A Switch Mode In-Line 12vdc Power Supply
This will power 1-200 Mini Plinth Lights - The PSU can be plugged into a mains socket, or the plug can be removed and the lead connected to a fused light switch (Electrician Required).
£59.00


0.5A Switchmode In-line 12vdc Power Supply
A tiny Power supply capable of powering 1-7 Mini Plinth Lights. It is so small it will fit through a downlight hole or light switch hole for ease of access. The unit has Mains (240vAC) Input and 12vdc Output terminals for hard wiring.
£9.50


  Dimmers Price  
Electronic Dimmer (8A) - Rotary
This fits between the low voltage output of the Power Supply and the Plinth Lights. Capable of controlling 1-145 Mini Plinth Lights.
£13.50


Remote Control Electronic Dimmer (3 Amps)
This fits between the low voltage output of the Power Supply and the Mini Plinth Lights. Capable of controlling 1-54 Mini Plinth Lights.
£12.50