Mini Colour Changeable LED Plinth / Deck Light (Waterproof IP67, 12vdc)

Product Description

This product is 304 Stainless Steel and completely waterproof (IP67) allowing it to be used for a multitude of applications such as; Plinth Lighting in the Kitchen, the Bathroom Floor, Walls, Ceiling, or even around the shower tray. They can also be used outside the house in Steps or Decking.

Used on it's own it can display 7 Colours; White, Blue, Green, Red, Purple, Pink, Yellow, and Cyan by connecting the wire for the corresponding colour you require.

These lights don't t get hot so can be mounted in wood and plastics.

*If you connect them to one of our controllers (see below) it is possible to be operated via wired remote (ZAP), wireless remote (ZEN), or by Smartphone or Tablet. These allow the power to be switched off, with auto resume of last setting when switched on again at the light switch.

The auto resume makes it possible to use a PIR (Motion) Detector in the ceiling so the lights switch on when somebody enters the room and off again on a preset time when the room is unoccupied.

Connection guide for the Plinth Lights

Although they draw little power, they will provide a reflected glow from walls and ceilings, enough for most people to see around the room.

The Spring Clips on the side of the light hold the LED in position. For installations in showers or wet rooms we recommend applying a small bead of silicone to the back of the light before pushing into place, this will prevent water ingress behind the surface the light is fitted to.

Each one of these lights is fitted with twin 500mm wires with quick connectors allowing one light to be plugged into another, with a distance of up to nearly 1 Meter between each light, we supply 1M extension Cables (below) if you need more space between each light. This makes installation easy with only the first light in the chain needing to be connected to the Power Supply or the Flexi Driver.

You can have just one light in the installation or a chain of them displaying the same colours at the same time, if additional Flexi Drivers are used different Zones can be created for independent colours. They will work in conjunction with our other LED Mood Lighting products for a complete lighting network, all controlled via one Remote Control.

10 of these left on white would draw just 7.2 watts, costing around 20p a week to run

This is a compact effective light source at a reasonable price.

The cut out hole size required for these lights is just 16mm

Gallery

Product Specification

Voltage12vdc
Max. Current60ma
LED TypeRGB
LED Power0.72 Watts
Lens MaterialGlass
Lens Diameter10mm
Lens ClarityClear
Cut out Diameter16mm
Flange Diameter20mm
Body Length20mm
Recess Depth Required to fit LED25mm
No. of Wires4 in 4 out
Wire Length0.5M (19")
DurabilityIP67
Warranty2 Years
CertificationsCE, RoHS

Product Code: MiniRGBSPOT

£8.95
Quantity :
Quantity Prices:
2 for£8.75 each
5 for£8.50 each
10 for£7.35 each
20 for£7.05 each

Other Options

Please choose one of the options below for more details

LED Plinth Light Display one of the many shades of blue This RGB LED is made from 304 Stainless Steel so will not rust

Accessories

For more information about one of the products below simply click the name of the product.

  Colour Controller Price  
Flexi Driver (2.1M Colour Driver)
Gradual Colour changing over 90 seconds, lock any colour by switching off then back on
£35.00
Quantity :
Flexi Driver+ (2.1 Million Colour Driver)
Provides basic colour control, with sound-to-ligt response, static or colour changing, and sound-to-light response with 2 Memory presets.
£46.95
Quantity :
ZEN (2.1M Colour) Controller with Remote & Remote/Display
Remote Control with control over speed of colour change, static colours, colour palette and range control and sound-to-light response.
£78.00


Wi-Fi Lightbox Colour Controller
Colour and brightness control from any Web enabled device over Wi-Fi, this device does not have to be linked to your Router. Capable of powering 200 x Plinth Lights directly with more connectable through the Ampbox.
£65.00


LightBox Smartphone RGB LED Controller
Colour control of up to 133 plinth plights via a suitable Smartphone or Tablet, allows colour changing with speed control, static colour, brightness control etc. Free Downloadable App. Resumes last setting when switched on at power. No Flexidriver required with this product.
£49.00


  Power Supplies Price  
2A Switchmode Plug-top 12vdc Power Supply, Free DC Connector (5 Amp)
This will power up to 26 Plinth Lights - The PSU can be plugged into a mains socket.
£8.00


1A Switchmode In-Line 12vdc Power Supply, Free (5 Amp) DC Connector
This will power up to 13 Plinth Lights - The PSU can be plugged into a mains socket, or the plug can be removed and the lead connected to a fused light switch (Electrician Required).
£11.50


2A Switchmode In-Line 12vdc Power Supply, Free DC Connector (5 Amp)
This will power up to 26 Plinth Lights - The PSU can be plugged into a mains socket, or the plug can be removed and the lead connected to a fused light switch (Electrician Required).
£14.00


3A Switchmode In-Line 12vdc Power Supply, Free DC Connector (5 Amp)
This will power up to 40 Plinth Lights - The PSU can be plugged into a mains socket, or the plug can be removed and the lead connected to a fused light switch (Electrician Required).
£16.00


0.5A Switchmode In-line 12vdc Power Supply
A tiny Power supply capable of powering 1-7 Mini Colour Changeable Plinth Lights. It is so small it will fit through a downlight hole or light switch hole for ease of access. The unit has Mains (240vAC) Input and 12vdc Output terminals for hard wiring.
£9.50


  Dimmers Price  
ZAP (2.1M Colour) Controller
Use with the Flexidriver for very easy control - ideal for customers that want simplicity.
£38.00