Single Colour LED Plinth and Floor Light (Waterproof IP67, 12vdc)

Product Description

Designed for use indoors or outdoors these LED are fitted within a polycarbonate housing with stainless steel bezel on the face of the lamps. They will provide an attractive glowing light that is not blinding but enough to give a welcoming light to any room. Use with our Flush Mount PIR Sensor for automatic switching on and off (timer) when someone enters the room.

The Plinth Lights are IP67 meaning they are waterproof and suitable for use in Bathrooms, Kitchens, Living Rooms, or even outdoors in Driveways or Decking.

This product is low powered and does not get hot or project any heat

Diode and transistor circuitry is built into each Plinth Lights to protect the LEDs from excessive voltage and current, this will result in long term reliability with very little light decay. Most other Plinth Lights on the market do not have this circuitry so cannot be expected to last anywhere near as long.

Each Plinth light is pre-wired with 2 × 0.5 Meter cables each with opposite waterproof connectors allowing the lights to be daisy chained. This makes installation easy with only the first light in the chain needing to be connected to the Power Supply.

There are a choice Power Supplies (Transformers), the size of Power Supply you will need depends on how many you want to power. Below we have listed the amount of Mini Plinth Lights each of the Power Supplies can power.

The lights can be almost up to 1 Meter apart without needing to extend the cable.

We stock a range of Plug and Play extension cables for areas where you need to extend the cable between the lights (see related items below).

Available in White, Warm White, and Blue.

A recent customer review of this product:

"I am thrilled with my warm-white plinth lights, sourced through Litewave. Having looked carefully on the internet for some mini LED lights to draw attention to a bathroom step, these are perfect as they are easy to recess at a unit depth of only 18.5mm. Litewave were knowledgeable and happy to answer any number of questions. I can't wait to see the tiny lights insitu, and highly recommend Litewave: 10/10 for service, 10/10 for prompt delivery of my order."
Mrs Nicky. G, Kent


Product Specification

Max. Current25ma
LED Power0.3 Watts
Lifetime40,000+ hours
Cut out Diameter23-25mm
Flange Diameter30mm
Body Length18.5mm
Recess Depth Required to fit LED18.5mm
Cable Length0.5M
Waterproof ConnectorsMale & Female on each cable
Housing Materials304 Stainless Steel & Polycarbonate
Max. Walk over weight100 KG
Warranty2 Years
CertificationsCE, RoHS

Product Documents

Product Code: SCDSPL

Select Colour
Quantity :
Quantity Prices:
2 for£8.35 each
5 for£8.20 each
10 for£7.55 each
20 for£7.05 each