Colour Changing LED Modules - 2.1 Million Colours

	Our latest product has the versatility of our Superflux LED Modules but with the added advantage of being able to show any colour (with the use of a Flexidriver). The RGB Modules use a 3 Colour RGB LED; Red, Green, and Blue. By mixing various levels of each colour upto 2.1 million colours and shades are possible! Safe low voltage - 12vdc. Ideal for: Lighting cabinets, behind glassware, shelf lighting, contour lighting, lighting architraves, backlighting Plasma/LCDs, Home Cinema lighting etc., bar lighting, Plinth Lighting. Safe low voltage - 12vdc. The LEDs produce a wide light dispersion (120 degrees) which gives a reflected glow similar to that of neon from nearby surfaces and objects. There are not dots or hotspots. The Modules can be cut / joined to make any length you need, simply cut the wire between the Modules and extend as required (4-Core Cable is available to order below). Full instructions are included. The RGB Modules are controlled via the ICELED Flexidriver, it has a standalone mode which allows a gradually colour phasing, any colour can be locked by briefly switching the power off and back on within 1-2 seconds, to unlock simply repeat. Even more control is possible including sound activation by using the ZAP+ or ZEN Controller. Click here to see how it's connected. For simplicity we would recommend the ZAP+ Controller. Advanced setups such as zones will require a ZEN Controller. The RGB Modules can also be linked to any of our other Mood Lighting products. Chain of 10 RGB LED Modules (Length 950mm) - £35.00 Complete Chain of 50 RGB LED Modules (Length 4.75 Meters) - £158 ICELED Flexidriver to control colours (will power up to 250 RGB Modules) - £35 THIS ITEM IS ALSO REQUIRED IF YOU USE A ZAP+ or ZEN CONTROLLER Additional 4 Core Cable Cable to extend the wire between lengths of RGB Modules and Flexidriver 70p per meter. Extra Control ICELED ZAP+ (wired) Controller with sound control - £38 ICELED ZEN (infra-red remote) Controller with audio line-in for sound to light effects - £78 Power Supplies Plug-in 2A Switch Mode Power Supply (Capable of powering up to 30 RGB Modules) - £8.00 In-Line* 3.5A Switch Mode Power Supply (Capable of powering up to 50 RGB Modules) - £17.00. Discount for Quantity. In-Line* 5A Switch Mode Power Supply (Capable of powering up to 75 RGB Modules) - £25.00. Discount for Quantity. Use with the ZEN Controller. *In-Line Power Supplies have a removable Mains plug for permanent installations i.e through a (fused) light switch.

Module Dimensions: (L) 43.6mm (W) x 12.4mm (D) x 8.5mm Connecting Wire: 4 Core Cable, Extendable. LED Type: RGB SMD Voltage: 12vdc Max. Current per Modules: 54ma (0.054A) (when showing white) Max. Current per chain of 50 Modules: 2700ma (2.7A) (when showing white) Light Dispersion: 120 degrees. Luminous Flux (lm) per 500mm: Red~70, Green~200, Blue ~40 Dominant Wavelength (nm): Red 615~635, Green 518~535, Blue 460~475 IP Rating: IP55 Operating Temp. -5～ 55 oC
Ideal for: Kitchen Cabinet / Plinth lighting Alcoves and Architraves Glass Blocks Home Cinema Stair Lights Sign Lighting


	CONTROL
	ICELED Flexidriver can be used with or without an external controller. A built-in programme allows it to perform a variety of functions simply by connecting to a 12 Volt DC supply. Full easy to follow instructions are included to help you get the best out of the product.
Flexidriver Specifications Nominal Supply Voltage: 12vdc Maximum Switched Current: 5 Amps (per channel) Maximum "through" current: 15 Amps Maximum Load: 180 watts @ 12vdc (250 RGB LED Modules) Data accepted: Global ICELED, DMX via ICELED Bridge, UFO Tube segment 0, pixel 0 Colours: 2,097152. 7 Bit 128 Levels. Dimensions of Flexidriver: L 65mm, W 50mm, H 25mm		One Flexidriver is capable of powering up to 250 RGB LED Modules The diagram below illustrates how the 4 wires from the RGB Modules are connected to the Flexidriver and in turn the power supply. Click on image for a larger diagram, other diagrams also shown for the ZAP+, and ZEN Controller.