Colour Changing LED Modules - 2.1 Million Colours

	Our latest product has the versatility of our SMD LED Modules but with the added advantage of being able to show any colour (with the use of a Flexidriver or 7 colours if used without it). The RGB Modules use a 3 Colour RGB LED; Red, Green, and Blue. By mixing various levels of each colour upto 2.1 million colours and shades are possible! Safe low voltage - 12vdc. Splashproof Self-adhesive pads pre-fitted on the back for quick installation, mounting lugs allow for screw fixing also. Ideal for: Lighting cabinets, behind glassware, shelf lighting, contour lighting, lighting architraves, backlighting Plasma/LCDs, Home Cinema lighting etc., bar lighting, Plinth Lighting. Safe low voltage - 12vdc. The LEDs produce a wide light dispersion (120 degrees) which gives a reflected glow similar to that of neon from nearby surfaces and objects. There are not dots or hotspots. The Modules can be cut / joined to make any length you need, simply cut the wire between the Modules and extend as required (4-Core Cable is available to order below). Full instructions are included. Ideally the RGB Modules should be controlled via the ICELED Flexidriver, it has a standalone mode which allows a gradually colour phasing, any colour can be locked by briefly switching the power off and back on within 1-2 seconds, to unlock simply repeat. Even more control is possible including sound activation by using the ZAP+ or ZEN Controller. Click here to see how it's connected. For simplicity we would recommend the ZAP+ Controller. Advanced setups such as zones will require a ZEN Controller. The RGB Modules can also be linked to any of our other Mood Lighting products. RGB Module - £3.50 each Automatic discount for quantities ICELED Flexidriver to control colours (will power up to 250 RGB Modules) - £35 THIS ITEM IS ALSO REQUIRED IF YOU USE A ZAP+ or ZEN CONTROLLER Additional 4 Core Cable Cable to extend the wire between lengths of RGB Modules and Flexidriver 70p per meter. Extra Control ICELED ZAP+ (wired) Controller with sound control - £38 ICELED ZEN (infra-red remote) Controller with audio line-in for sound to light effects - £78 Power Supplies Plug-in 2A Switch Mode Power Supply (Capable of powering up to 30 RGB Modules) - £8.00 In-Line* 3.5A Switch Mode Power Supply (Capable of powering up to 50 RGB Modules) - £17.00. Discount for Quantity. In-Line* 5A Switch Mode Power Supply (Capable of powering up to 75 RGB Modules) - £25.00. Discount for Quantity. Use with the ZEN Controller. In-Line* 10A Switch Mode Power Supply (Capable of powering up to 150 RGB Modules) - £39.00. Discount for Quantity. Use with the ZEN Controller. *In-Line Power Supplies have a removable Mains plug for permanent installations i.e through a (fused) light switch.

Module Dimensions: (L) 78mm (W) x 15mm (D) x 8mm Total length for Chain of 20 Modules: 3.16m (10ft 4") Connecting Wire: 4 Core Cable, Extendable. LED Type: RGB SMD Voltage: 12vdc Max. Current per Module: 60ma (0.06A) (when showing white) Max. Current per chain of 20 Modules: 1080ma (1.1A) (when showing white) Light Dispersion: 120 degrees. Luminous Flux (lm) Chain 20 Modules: 360lm Dominant Wavelength (nm): Red 615~635, Green 518~535, Blue 460~475 IP Rating: IP55 Operating Temp. -5～ 55 oC
Ideal for: Kitchen Cabinet / Plinth lighting Alcoves and Architraves Glass Blocks Home Cinema Stair Lights Sign Lighting

To calculate how many Modules you need to light an area measure the total length you intend to light up. Formula: Length to Light in Meters / 158 = Number of Modules required. For example: if you wanted to light a handrail measuring 2.1 Meters you would divide 2100 by 158, this would give 13.29, round down to 13. So you would need 13 SMD Modules.


	CONTROL
	ICELED Flexidriver can be used with or without an external controller. A built-in programme allows it to perform a variety of functions simply by connecting to a 12 Volt DC supply. Full easy to follow instructions are included to help you get the best out of the product.
Flexidriver Specifications Nominal Supply Voltage: 12vdc Maximum Switched Current: 5 Amps (per channel) Maximum "through" current: 15 Amps Maximum Load: 180 watts @ 12vdc (250 RGB LED Modules) Data accepted: Global ICELED, DMX via ICELED Bridge, UFO Tube segment 0, pixel 0 Colours: 2,097152. 7 Bit 128 Levels. Dimensions of Flexidriver: L 65mm, W 50mm, H 25mm		One Flexidriver is capable of powering up to 250 RGB LED Modules The diagram below illustrates how the 4 wires from the RGB Modules are connected to the Flexidriver and in turn the power supply. Click on image for a larger diagram, other diagrams also shown for the ZAP+, and ZEN Controller.