Colour Changing Flexible LED Tape - 2.1 Million Colours

Flexible LED Tape is one of the most streamline LED Light sources currently available. It is a 2-in-1 product which means it can be used with or without it's silicone sleave.

The Tape is supplied in a silica sleeve housing (waterproof IP67) with a self-adhesive backing. It can be used within the housing for applications where it will come into contact with water or moisture such as a bathroom or garden.

For use in tight spaces where water resistance is not required the tape can easily be removed from its silicone housing by sliding a sharp pair of scissors along the housing.

The tape itself is extremely thin with a depth of just 2.2mm. It has a 3M self-adhesive backing so is easily applied to most smooth surfaces by simply removing the backing paper.

The picture below shows how thin the LED Tape actually is.

Ideal for: Lighting cabinets, behind glassware, shelf lighting including edge lighting glass shelves, contour lighting, lighting architraves, backlighting Plasma/LCDs, Home Cinema lighting etc, Garden/Pathway lighting. Plinth Lighting.

Below: LED Tape at use in a kitchen, click on image to see a full gallery of photos.

The LEDs used in the tape are RGB SMD LEDs, which have LED Emitters in the 3 primary colours Red, Green, and Blue. By mixing various levels of each colour upto 2.1 million colours and shades are possible!

Safe low voltage - 12vdc.

The LEDs produce a wide light dispersion (120 degrees) which gives a reflected glow similar to that of neon from nearby surfaces and objects. There are not dots or hotspots.

Below: just a small selection of virtually unlimited colours.

The tape can be cut / joined to make any length you need, connections and cutting points are at 3 LED (100mm / 4inch) intervals. Full instructions are included.

The LED Tape is controlled via the ICELED Flexidriver, it has a standalone mode which allows a gradually colour phasing, any colour can be locked by briefly switching the power off and back on within 1-2 seconds, to unlock simply repeat. Even more control is possible including sound activation by using the ZAP+ or ZEN Controller.

Click here to see how it's connected.

For simplicity we would recommend the ZAP+ Controller. Advanced setups such as zones will require a ZEN Controller. The Tape can also be linked to any of our other Mood Lighting products.

500mm (19 Inch) LED Tape (15 LEDs) - £19

2 Meter (78 Inch) LED Tape (60 LEDs) - £69

4 Meter (157 inch) LED Tape (120 LEDs) - £129

6 Meter (236 inch) LED Tape (180 LEDs) - £175

ICELED Flexidriver to control colours (will power up to 25 Meters of Tape) - £35

Extra Control

ICELED ZAP+ (wired) Controller with sound control - £38

ICELED ZEN (infra-red remote) Controller with audio line-in for sound to light effects - £78

Power Supplies

Plug-in 1.25A Switch Mode Power Supply (Capable of powering up to 2 Meters of tape in total) - £7.00

In-Line 3.8A Switch Mode Power Supply (Capable of powering up to 6 Meters of tape in total) - £19.00. Discount for Quantity.

Specifications:

Dimensions with Silica Sleeve : 12mm (W) x 6mm (D) x 500/2000/4000mm (L)

Dimensions of Tape: 8mm (W) x 2.2mm (D) x 500/2000/4000mm (L)

ICELED Flexidriver can be used with or without an external controller. A built-in programme allows it to perform a variety of functions simply by connecting to a 12 Volt DC supply.

Full easy to follow instructions are included to help you get the best out of the product.

Flexidriver Specifications

Nominal Supply Voltage: 12vdc

Maximum Switched Current: 5 Amps (per channel)

Maximum "through" current: 15 Amps

Maximum Load: 180 wats @ 12vdc (25 Meters LED Tape)

Data accepted: Global ICELED, DMX via ICELED Bridge, UFO Tube segment 0, pixel 0

Colours: 2,097152. 7 Bit 128 Levels.

Dimensions of Flexidriver: W 50mm, H 15mm, D 65mm