 |
|
Step 1
|
 |
|
Using wire strippers, carefully remove around 18mm of the outer pvc sleave from the end of your Glow Wire, check that you have not removed the two fine, silvery wires. If you have accidently removed one or two of the wires,carefully repeat this step. Some of our customers use a sharp knife* or stanley knife blade* to remove the sleave - but do so at your own risk. If you find that you can remove the outer sleave but not the inner sleave try using some heat, this will cause the inner sleave to peel back. |
*The Litewave Company cannot be held responsible for any injury incurred to yourself or others by using any of the above tools mentioned.
|
|
©
Copyright The Litewave Company
|