Product Description
Designed to control low power lights such as LED Lighting this PIR Switch will automatically switch on the Power to the lights when it senses a person enter the room.
The lights will stay on for the time you pre-set when the person leaves the room, this can be from 10 seconds to 40 minutes.
Adjustable light sensitivity and time delay
Product Specification
Input Voltage | 220 - 240Vac, 50Hz |
Hole Cut out | 73/75mm |
Mounting Depth Required | 95mm |
Delay Time | 10 Seconds to 40 Mins in 9 Steps |
Detection Range | 360 Degrees with 5m Diameter at 2.4M ceiling height |
Minimum Load | 2w Resistive suitable for LED Lighting |
Maximum Loading | 1000w of Resistive Loads |
Maximum Loading | 750w of Transformer Loads |
IP Rating | IP20. Not suitable for use above shower |
Lux | 10 to 1000 and photocell becomes inactive |