Home - Guides - Colour Changing (RGB) LED Spotlights - Wiring Schematics

Colour Changing (RGB) LED Spotlights - Wiring Schematics

The Mains Power Supply converts the voltage into a safe low voltage of 12vdc which the RGB Spotlight and controllers run from.

Full instructions will be included with the RGB Spotlights.

Below: Connection of the RGB Spotlight to the Flexidriver and Power Supply.



Below: A ZAP+ Controller is added for more control options.

 

Below: A more complicated system using the ZEN Controller, this will give wireless control and control over separate Zones, a Flexidriver will be required per Zone if you want different Zones showing different colours at the same time.

To power several RGB Spotlights you will need to wire them in parallel. Connect all wires together into a large terminal block (approx 30A) and run a 4-core cable rated for the total load to the output of the Flexidriver.

 

Recent Blogs

• Wall Uplighting
• Roof Lantern Lights - Made-to-measure
• Why many so-called Professional LED Strips are not what they claim to be
• The Ultimate Guide to LED Strip Lights for Home — Avoid Early Dimming

Recent Guides

• Not all LED Strips are the same!
• Are COB LED Strips always better? Not necessarily
• How to Connect Your Litewave Architectural LED Strip to a Colour Controller
• LED Strip Lighting for Kitchens