 |
 |
|
The ICELED GEMs are capable of producing over 2 million colours by using the latest colour mixing technology. Gems are available in 3 versions, "Plug'n'Play", "Rough", and "Aluminium". The miniature plug'n'play format will clip directly in place of the 1.5" long filament lamp frequently found in existing interior light fixtures. |
|||
|
Download video of Gem in action - 271 kb The effect in the Video is achieved using 2 x Plug 'n Play Gems and a ZAP+ Controller, available at the bottom of the page. |
 |
||
|
The Plug 'n Play Gem (above) is very compact, the same size as a medium 211 Dome Lamp - 38mm. |
 |
||
|
The "Rough" Gem (above) is completely water resistant - ideal for use outside the vehicle. IP68. |
The rough gem is the same device housed in a rugged,
watertight enclosure for use in exposed locations - or where no pre-existing
light fitting is available.
|
||
|
The "Aluminium" Gem (above) is completely water resistant - ideal for use outside the vehicle or anywhere for that matter. IP68. |
The Gem aluminium is similar to the "Rough" except it is encased in an attractive aluminium case with recessed lenses which also help focus the light. Measures just 65mm in length by 12mm deep. |
||
|
APPLICATIONS Both types produce a wide-angle beam (90 degrees) suitable for floodlighting at close range. Typical applications include interior dome lights, foot-well illumination, luggage and engine bay lighting. In particular the ruggedised version is also ideal for 'filling-in' gaps in underbody lighting such as around the insides of wheel-arches. It will also find plenty of uses on Motorbikes behind the farings, radiator, caliper, headlamp illumination etc.
The Plug'n'play version can pick up its power directly from any suitable light fitting but also comes with a detachable cable that can be used to provide power and/or data for linking to ICELED controllers. The rough gem has a fixed cable for supplying power and optional data.
|
|||
|
|
|
|
|
|
CONTROL |
|||
 |
Both types of gem can be used with or without external
controllers. A built-in programme
allows them to perform a variety of functions simply by connecting them
to a 12 Volt DC supply. This makes them ideal as 'starter' or 'standalone'
light sources suitable for use wherever 12 Volts are present e.g. inside
PC cases.
|
||
|
SPECIFICATIONS Maximum current drain - 0.2 Amps Typical drain - 0.1 Amps LED Light Deispersion - 120 degrees. On-board current regulation guarantees that Gems operate consistently at peak intensity over a wide supply voltage of 10 - 16 Volts DC. 2,097152 Colours. 7 Bit 128 Levels. Reverse polarity and over-voltage protection are also built in. Dimensions of Plug 'n Play Gem W 1.5" H 0.6" D 0.4" (excluding contacts) Dimensions of Rough Gem W 2" H 1.2" D 0.9" (excluding mounting flanges) Dimensions of Rough Gem W 2.5" H 0.75" D 0.3" |
Gem "Plug'n'Play" - £37.50 Gem "Rough" - £39.50 Gem "Aluminium" - £44.50 ICELED Zap+ controller - £38 each 2 x ICELED Gems & Zap+ Controller - from £105 Full Footwell Kit: 4 ICELED Gems & Zap+ Controller - from £178 |
||
 |
The Zap+ controller can be used with the Gems and is capable of generating a number of automated lighting programs (below) as well as providing direct manual control of the colours displayed. The Zap can also power Trons, Floods, Spots, and the Scanner Modes: On/off, Static Colour, Phasing Colour, Colour to sound, Strobe. |
|
|
©
Copyright The Litewave Company
|
