24vdc Mini (20mm) Single Colour LED Plinth and Floor Light (Waterproof IP67)

Product Description

Due to the popularity of the 12vdc Mini Plinth Light we have developed a 24vdc version for use where long cable runs (20M or more) are required such as Edge-Lit Driveways, Conference Centres, and Hotels.

Ideal for low level lighting or marker lights. For use in ceilings, around skirting boards, kitchen plinths, shower plinths and bath plinths & alcoves, steps and stairs, even outdoors in patios, decking and walls.

This high quality fitting has a single SMD LED Chip housed within a 314 Stainless Steel body with a beautifully machined bezel giving the product an attractive appearance whether switched on or off.

  • Waterproof to IP67 (temporary submersion under water)
  • Stainless Steel (Will not rust)
  • Suitable for Boats & Yachts
  • Suitable for use indoors or outdoors
  • Low power consumption just 0.6 watts per Light!

Use with our Flush Mount PIR Sensor for automatic switching on and off (timer) when someone enters the room.

A low level light for accenting a room or providing a glow at night time, not designed for general illumination. It does not get hot or project any heat

The Plinth Lights are IP67 meaning they are waterproof and suitable for use in any damp or wet environment.

Each Plinth light is pre-wired with 2 × 1 Meter cables each with opposite waterproof connectors allowing the lights to be daisy chained. This makes installation easy with only the first light in the chain needing to be connected to the Power Supply.

There are a choice Power Supplies (Transformers), the size of Power Supply you will need depends on how many you want to power. Below we have listed the amount of Mini Plinth Lights each of the Power Supplies can power.

The lights can be almost up to 1 Meter apart without needing to extend the cable.

We stock a range of Plug and Play extension cables for areas where you need to extend the cable between the lights (see related items below).

Product Specification

Voltage24vdc
Max. Current25ma
LED TypeSMD Warm White
LED Power0.6 Watts
Lens MaterialGlass
Flange Diameter20mm
Lens Diameter10mm
Cut out Diameter16mm
Lens ClarityClear
Body Length25mm
Recess Depth Required to fit LED30mm
No. of Wires2 in 2 out
Wire Length1 Metre (39")
DurabilityIP67
Net Weight inc. Cables85g
CertificationsCE, RoHS, F, III

Product Code: Mini-SPFL24vdc

£9.65
Quantity :
Quantity Prices:
2 for£9.45 each
5 for£9.20 each
10 for£8.95 each
20 for£8.75 each
50 for£8.45 each