Superflux LED Modules |
 |
|
The Superflux LED Module has 3 Superflux LEDs resin sealed into a plastic case making them suitable for use outdoors, or in wet environments. They are IP rated and don't get hot. Very energy efficient, a chain of 20 Modules use just 3-7 watts depending on the LED Colour.
Superflux LEDs give a wide dispersion of light - 120 degrees, around 4 to 5 times more than standard 5mm LEDs. The Modules have no need for a resistor - it's all built into the case making them ready to connect to any 12v dc power supply.
The Modules are supplied from the factory in a Daisy Chain of 20, the connecting wire between each module is 3 inches (90mm), the wire can be extended to the length required for your installation. The Modules are very versatile and can be cut down to the amount required. We can supply them as single or multiple modules (pre-connected). Ideal for: Sign Lighting, Work Vans, Under Counters, Under Cabinet Lighting, Ornament Cabinets, Bars, Stairs & Steps, R/C Models, etc..
Above: A sofa floating on light, the LEDs are only a few inches from the ground so the light from the LEDs creates pools of light on the floor. To create a continous wash of colour you could site them futher from the floor or use SMD LED Modules which have a wider dispersion of light. The LED Modules have mounting lugs pre-moulded into the casing making installation straight forward. For non-permanent installations double-sided adhesive pads can be used on the flat backs of the modules. Available in 5 Colours - Blue, Green, Red, White, and Yellow Superflux LED Module (priced per Module) £2.30 each, 5 for £11.00, or 10 for £20.00. Further discounts for higher quantities.
If you want a brighter product you could also consider our new SMD Modules Power Supplies. Plug-In 12vdc Power Supply (2A) for powering the Modules from Mains voltage. Capable of powering up to 55 Modules. Advice will be given when required upon order placement. £8.00 Each (Power supply only suitable for U.K Households) In-Line* 3.5A Switch Mode Power Supply (Capable of powering up to 100 Modules) - £17.00. Discount for Quantity.
In-Line* 5A Switch Mode Power Supply (Capable of powering up to 140 Modules) - £25.00. Discount for Quantity.
In-Line* 10A Switch Mode Power Supply (Capable of powering up to 280 Modules) - £39.00. Discount for Quantity. The 10A PSUs are supplied at cost price and are not for sale separately.
*In-Line Power Supplies have a removable Mains plug for permanent installations i.e through a (fused) light switch. |
|
Aired Wednesday 20 May 2009 at 2pm. |
|||
 |
|||
 |
|||
 |
|||
 |
|||
 |
|||
| Below: Schematic | |||
 |
|||
Please click over pictures to enlarge |
|||
|
Module Dimensions, approximate as we have several types in stock each with slightly different dimensions. (L)90mm [main body] x (B)19mm x (H)11mm (L) 3 1/2" x (B) 11/16" x (H) 7/16" Total length for a chain of 20 Modules is approx 128 Inches, or 10ft 6". RATED AT IP65 (Waterproof) Power Requirments Per Module: Blue - 0.24/20ma Green - 0.24/20ma White - 0.24/20ma Red - 0.54/45ma Yellow - 0.54/45ma |
|||
To calculate how many Modules you need to light an area measure the total length you intend to light up. Formula: Length to Light in Meters / 158 = Number of Modules required. For example: if you wanted to light a handrail measuring 2.1 Meters you would divide 2100 by 158, this would give 13.29, round down to 13. So you would need 13 SMD Modules. |
|||
|
|||
|
Ideal For: Backlighting Garden/Patio Lighting Kitchen Worksurface Lighting Cab Lighting Vans/Trucks Workshop/Shed Lighting
|
|
|
©
Copyright Litewave Ltd
|