How to control tens or hundreds of Meters of RGB LED Tape

Our Colour Changing RGB LED Tape is ideal for commercial use where large installations of RGB LED Tape is required.

RGB LED Tape can be controlled by DMX 512 via our DMX Bridge or by our ZEN System with built in lighting control and Zones.  The ZEN allows different scenes to be set with each Zone being independently controllable.

Our RGB LED Tape is not limited to a 5 Meter run like amateur systems but tens or hundreds of meters can be ran via our passive wiring system.  The system is designed and manufactured in the U.K and is a proven system which we have been selling since 2004.  It is technologically superior to most systems on the market especially those from the far east.

Please Note: We sell the ZEN / DMX and RGB LED Tape as a system, we do not sell the ZEN or DMX separately.

The Diagram below shows how to run 72 Meters of RGB Tape from a single Controller.  This can be decreased or increased by using less or an additional Power Supply and Flexidriver for every additional 18 Meters of LED Tape you need to run.  In effect there is virtually no limit to how much LED Tape can be controlled this way.

This method of connection is recommended for large installations in Hotels, Conference Rooms, Restaurants etc.

How to run 72 Meters or more og RGB LED Strip for Commercial Lighting for Venues and Hotels

We consistently supply commercial shop fitters and electricians that have recognised they cannot afford to fit inferior LED Strip or Controllers, the risk of faults and product failures which is all too common with the majority of the cheap products being offered far outweights the lower cost.

Our ZEN System can control not only our RGB LED Strip but also our Stainless Steel RGB Spotlights, Fiber Optics, Modules, and Digital LED Tubes.  One remote controls everything with variable colour ranges which can show corporate colours, customisable colour palettes and even sound to light control.  This is all built into a single ZEN Box measuring approximatey 100mm x 100mm with a depth of just 50mm.  The Infra-Red Receiver also doubles up as a display which can be located some distance away from the ZEN Box so that it is in line of sight of the remote control.

The ZEN can even be set to resume it's last setting by simply switching the system on at a wall light switch, this allows the remote control to be left in a drawer until the settings need to be changed. This is ideal for restaurants and commercial venues such as conference centers where any member of staff can switch the system on.  It can even be wired to a PIR Switch to activate the system automatically when someone walks into the room.

The diagram below shows how our RGB LED Tape can be controlled from DMX Control by using our DMX 512 Bridge:

Controlling large installations of RGB LED Tape via DMX for commercial use


We offer free pre-sales and after sales technical support.  If you have a lighting project or installation please email or telephone us with your requirements and we will provide a no obligation quotation for the exact products you will need for a successful installation.