Roof Lantern and Sky Light Lighting Kits

Many homes have Roof Lanterns, Orangeries, and some even have Atriums. During the day they illuminate the room with natural daylight but at night there can be a black void.

The frame or upstand (vertical section from ceiling to Lantern) around this space can be illuminated with a vibrant display of light which will be a focal point for the entire area in the evening. It will set the mood for an evening relaxing with friends, or a meal - if you have a dining table below the roof light.

Continued below...

...

For your Roof Lantern Light we can supply single colour or colour changeable LED Strips ready to fit around the perimeter of the roof light. Included in our Kits is our Litewave Architectural Strip as it offers very long lifetime (>75,000) hours with minimal decay in brightness. It uses uses Triodes alongside the LEDs to manage power to them, negating the risk of getting odd colour patches.

Our Strip is extensively proven, with higher brightness, less decay and high reliability. This has been developed by us and includes a 6 Year Warranty.

Our Litewave name is stamped on our products and is not available from wholesalers, or other online companies - unless supplied through us.

Our RGB Kits can display whites, warm whites, pastels, and vivid colours.

Choose from:

• Litewave Pro Architectural White - 6 Year Warranty
• Litewave Architectural Pro Warm White - 6 Year Warranty
• Litewave Pro Architectural RGB - Colour Changeable - 6 Year Warranty
• RGB Dotless - For a Neon like belt of light around the Lantern

• Litewave Pro RGBW - Colour Changeable 4.3 Billion Colours - 6 Year Warranty, email us

The RGB Strip can be set to any colour out of the visible spectrum of light including white, warm whites, and pastels. When desired you can even select a gradual colour change creating an automatic sweep through the colours. Full speed control is possible so the lights take seconds, minutes, or an hour to complete the colour cycle.

Above is a selection of lighting kits for illuminating your roof lantern.

Generally our LED Strip with 30 LEDs per Metre is more than bright enough to illuminate the roof lantern, we also have 60 LED/M Strip which is double the brightness, bear in mind this uses more power.

Depending upon the angle of the glass in the roof lantern reflections of individual LEDs may occur, this can be greatly reduced, even eliminated by using an Aluminium Profile with a Frosted Diffuser.

Our Aluminium Profiles are ideal if you want the least intrusive platofrm in which to mount the LED Strip, it frames the Roof Lantern becoming a feature in itself. It is just 18mm deep. There are alternative Profiles but most are quite bulky at around 60mm, and are often plastic, or polystyrene.