Freephone 0800 999 89 85    Sales 01624 819130     EMail

Professional LED Strip - Constant Current

Several years ago we realised there was MASSIVE room for improvement for LED Strips. Most still only use resistors to protect the LEDs which can lead to early fading (just 6 weeks) and even complete failure of the LEDs along the Strip.

We decided to develop our own Litewave® branded Constant Current LED Strips for discerning customers that want the very best products. After all, homes and buildings are large investments that deserve quality products designed to last. If you think of other electronics in your home, your TV has a brand, your phone, oven, and even kettle has a brand. So why risk installing anything less than high quality LED Strip Lighting with a brand name.

These are the highest quality LED Strips you can install. Other Strips are no-name, strips with minimal electronics. These are designed for the discerning customer that wants the best.

LED Strips without our advanced electronic circuitry will peak at 1000 hours (6 weeks). Our Professional LED Strip is the only choice if you don't want to keep replacing them every few months to a couple of years!

*Thousands of satisfied customers, including the BBC, Professional Installers and Interior Designers, Electricians, Car & Yacht Manufacturers.

  • Designed to last beyond 50,000 hours, with up to 130 additional protective components per Metre.
  • More Vibrant, and evenly-lit than ANY standard LED Strip.
  • Our RGB Colour Changeable LED Strip can display any visible colour including whites, warm whites, pastels, and vivid colours
  • Ideal for anywhere you need discrete (or hidden) linear lighting, such as for Lighting Pelmets, Up-stands Lighting, Drop-ceiling Lights, and Lighted Roof Lanterns.
  • 3 Year Domestic and Commercial use warranty, even with 24/7 use.

Huge lighting projects a specialty, we can control the colour or brightness of any amount of LED Strip from 10cm to 1000's of Metres from a single controller, by Remote, App, or DMX.

Click Here for more information
More Information

Our Litewave® Constant Current LED Light Strips are the only choice for reliability which is why we supply to many of the big name companies, from Prestige Car Manufacturers, Hotels, Television companies (such as the BBC), and for installation on Super Yachts.

We can supply a system tailored to your exact requirements with every LED Strip made-to-measure, this could potentially save you hundreds of pounds, all at no extra charge! Free Quote

A lifetime of 50,000 hours or more can be expected with minimal loss in brightness. Standard and even sub-standard LED Strip is being sold everywhere these days, it does not have the additional 60-130 components per Metre to protect the LEDs. Unless it has the additional protective components on board, the LEDs will slowly begin to fade after 1000 hours, and in the case of Colour Changeable Strip the colours can drop out. This can happen after only several thousand hours of use, sometimes within a few months. LED Drop-outs are caused by the fatigue due to inadequate voltage and current regulation.

Constant Current LED Strip and Tape does not require any special drivers it can be powered from any good quality 10-15vdc power source such as 12vdc Switchmode Power Supply (Transformer) for use in the home from mains 240vAC, or from a 12v vehicle such as in Cars, Motorhomes, and Boats.

Unlike most LED Strip on the market, our Strip has from 60-130 additional components per Metre to protect the LEDs!
The dedicated on-board electronic driver circuitry with current and voltage regulation ensures that each LED receives the correct amount of voltage and current so that the LEDs do not over heat and each are illuminated to the same intensity.

The copper tracks are not flimsy like the cheap unreliable strips being sold all over the internet but are substantial 2oz tracks for less resistance and maximum current flow.

In addition to the regulated current and voltage the LEDs are of high quality from Manufacturers such as Samsung, LG, and Epistar. They are inspected at our factory for quality and colour consistency before enclosing, production, and final testing.

All of this results in consistent brightness (especially for long lengths), reliability and the longest lifespan, essential for customers that want the best.

Without the current and voltage regulation to the LEDs the brightness can steadily decline before the maximum lifetime of the LED is achieved. Other Strips even European brands will not compare, tests carried out over the last several years have proved our Constant Current Strips will retain their light intensity when the others have declined.

The quality of the light is also second to none, all of our LED Strips have LEDs with a high CRI (Colour Render Index) the white is a pure white like your computer screen showing a blank document, the warm white is not a yellowish white, but a soft sunny glow which will enhance the appearance of any room.

The Outdoor / Waterproof version (LED Tape) is supplied in a flat Silicone jacket with Silicone injected around the front back and sides of the circuit board providing complete protection from water and moisture. It is Odourless, UV Resistant and Fire Retardent.

All of our LED Tape and LED Strips use branded "A" Rated LEDs meaning they are not substandard LEDs that have faults or issues that will cause problems in the future. Every length of our LED Strip has LEDs which are consistent in colour and brightness.